$63.58 USD
Glow-Rite Hardscape LED Wall Light is 6.7″ wide by 1″ deep and 1.9″ high with a 1 1/2″ mounting flange designed for retaining walls or masonry; has high light output with incredible efficiency and versatility of use.
| Weight | 0.3 lbs |
|---|---|
| Dimensions | 7 × 4 × 3 in |
| Certifications | ETL Listed, CE (Europe) |
| Color Temperature | 3200K |
| Country of Origin | Manufactured in the USA |
| Light Output | 260 Lumens |
| Material | Aircraft Grade Aluminum |
| Power Draw | 3.75 Watts |
| Voltage | 12 volt DC |
| Waterproof | Yes |
| Wire Leads | 6 ft. cable w/ male Plug-N-Play connector |
Only logged in customers who have purchased this product may leave a review.
HARDSCAPE
Height: 0.75”
Head Width: 8.0”
Depth: 1.125”
Cord Type: Plug-N-Play
Cord Length: 60”
Housing Material: Die Cast Aluminum and Zinc
LED Type: Cree High Performance LEDs with life expectancy >20,000 hours
Light Output: 240 Lumens
Light Color Temperature: 3200K
Power Consumption: 3.75W
GLOWRITE
Height: 1.9”
Head Width: 6.75”
Mounting Flange Width: 4.0”
Mounting Flange Depth: 1.5”
Cord Type: Plug-N-Play
Cord Length: 60”
Housing Material: Die Cast Aluminum and Zinc
LED Type: Cree High Performance LEDs with life expectancy >20,000 hours
Light Output: 260 Lumens
Light Color Temperature: 3200K
Power Consumption: 3.75W
( 1 ) Glow-Rite LED Wall Light
( 1 ) PLUG-N-PLAY 5’ Cable
( 1 ) Female to Female PLUG-N-PLAY Connector
Click here for most current information: WARRANTY POLICY.
2655 S. Santa Fe Unit 4-A
Denver, CO 80223 USA
Toll Free: 1-800-258-0344
Tony (verified owner) –
The light they produce and the light spread is amazing. Just what I had hoped for. Easy to install. Two options to install the wiring. Either bury the wires in the ground up against the wall or in my case, the top caps of the wall came off easy with a hammer and chisel. Not much glue was used. I cut a groove in each 2nd layer stone and tucked the wire in the grooves. If possible I could include a photo of the lights on at night.
Jeanette Clark (verified owner) –
Ordered 3 for installation in a brick retaining wall. As expected, they were secured in place using the tab that is part of the design (placed between bricks that were then secured with adhesive). Unfortunately, 2 of the 3 are a noticeably different color temperature. We’ve been working with Dekor for weeks for a resolution and they finally provided replacement LED strips, but we can’t swap them out without paying a contractor to tear apart and rebuild part of the wall.
Joseph F. (verified owner) –
Joseph Hebert (verified owner) –
Susan D. (verified owner) –
The wall lights look great on our wall and also going down the steps. They were easy to install which we were very happy about.