Starting At: $253.29 USD
Full 360° rotation allows for easy customization in areas that are poorly lit, which truly makes this a very versatile product. great option for lighting walkways and stairs. Indoor uses include uplighting above fireplaces or inside of cabinet lighting. DIMMABLE. MANUFACTURED IN THE USA
| Weight | 4 lbs |
|---|---|
| Dimensions | 16 × 12 × 2 in |
| Color Temperature | 3200K |
| Mounting Hole Diameter | 0.90 in |
| Light Output | 35 Lumens |
| Light Output (NexGen) | 72 Lumens |
| Material | Cast Aluminum |
| Power Draw | 0.5 Watts |
| Power Draw (NexGen) | 1.2 Watts |
| Voltage | 12 volt DC |
| Waterproof | Yes |
| Wire Leads | 6 in pigtail w/ female Plug-N-Play |
Only logged in customers who have purchased this product may leave a review.
This Indoor LED Post Light Kit contains the following, however additional accessories may be needed, as each project is unique. You can order additional accessories here: Order Additional Accessories
( 8 ) LED Light Elements
( 8 ) Directional Light Housings in your choice of 7 different colors
( 8 ) LED Diffuser Discs with adhesive back
( 1 ) Custom Ground Forstner Bit
( 1 ) EZ Indoor Power Driver (2 amp, 24 watt) with the capacity to light (20) LED Light Elements
( 9 ) PLUG-N-PLAY 5’ Cables
( 2 ) 6-Port PLUG-N-PLAY Splitters
( 4 ) Mounting screws
( 1 ) Installation Instructions
The power supply / transformer included with this kit supports up to TWENTY (20) Petite Lamps. If you are ordering additional Petite Lamps with your kit or the transformer will be located in a damp area, you can request to upgrade your transformer when you purchase online.
NOTE: Wire is not included as each project is unique.
Wire can be added to your order – please see Accessories below.
Click here for most current information: WARRANTY POLICY.
Sir, I wanted to write and thank you for the high quality American made hardware you offer. I installed 10 of the Petite lights on my deck posts over the past several weeks and have received numerous comments and inquiries on the lights and installation. Thanks again for making a great product.
2655 S. Santa Fe Unit 4-A
Denver, CO 80223 USA
DEKOR®️ Canada Fulfillment
205 Champagne Drive, Unit 3A
Toronto, ON, M3J 2C6, Canada
Toll Free: 1-800-258-0344
Copyright 2024| Privacy Policy | Accessibility Statement | WordPress Web Design & Hosting Santa Barbara
Yes, DEKOR® manufactures all circuitry in Denver, CO providing excellent quality.
DEKOR® offers a COLORKONNECT WiFi controller and through the app you can dim the lights, change colors, and set schedules. You may also control light colors with dimming capability manually on the front face of the COLORKONNECT WiFi device.
When using the COLORKONNECT WiFi controller app provides you the ability to control your lights regardless of where you are located.
The 3W4PORT splitter/repeater has two functionalities: the splitter is used to connect the power wire and the three additional ports for 2-3 lights based on your lighting plan. The repeater is to be used every 20’ with long cable runs and at the light connections to enhance the signal creating pure colors from the first light to the last.
DEKOR® offers a simple 3W4PORT Plug-N-Play system with various cable lengths to make the install easy in any application.
Yes, with the use of two or more COLORKONNECT WiFi controllers and wiring two or more zones will deliver different light color patterns.
Yes, you can add to your current non-RGBW DEKOR® lighting system by adding RGBW lights! While the non-RGBW DEKOR lighting system is a 2-wire direct current system, and the RGBW DEKOR lighting system is a 3-wire direct current system, you are able to integrate both systems by creating a separate zone. Either using a splitter running from you current transformer or upgrading to a 100 or 200 watt transformer, which has more than one output from the transformer, you can create an additional zone or zones. Please call us if you need us to walk you through this!
The transconnect cable is for our standard DEKOR® Lighting 2-wire lights. The COLORCONNECT WiFi controller is a 3-wire system. The male-to-male cables come in lengths of 20”, 5’, 10’, 20’ are to be used to connect the COLORCONNECT WiFi controller and then to your first light.
For our RGBW system: The 36-watt and the 60-watt transformers will include one (1) 20’ 3WPNP male-to-male cable. The 100-watt transformer will come with (1) transconnect cable and (1) 20’ 3WPNP male-to-male cable. The 200-watt transformer will include (1) 20’ transconnect cable with two lead wires and (1) 20’ 3WPNP male-to-male cable.
The 3W4PORT splitter/repeater may only be used with the RGBW system. The 6-port splitter is a two wire and can only be used with our standard DEKOR® Lighting system.
Reviews
There are no reviews yet.