Starting At: $172.98 USD
The BEST glass baluster panels on the market! Our etched panels allow you to add the design or monogram of your choosing for a more personalized deck panel. Enjoy unobstructed views while adding striking architectural detail to your deck, balcony, porch, or patio. Made from 1/2″ thick safety glass, these elegant panels are simple to install and look great day or night.
Click here to download our Hi-Res Etched Panel Designs document.
These commercial quality glass panels are ½” thick and able to withstand hurricane-level wind loads. Our glass baluster panels are 7.5” wide. You have the option of lighting it up with our CREE LED lights, or not lighting it up at all. Tempered glass with pencil polished (rounded) edges. Available in three different sizes: Available in 26″, 27″ and 32″ lengths
| Weight | 8 lbs |
|---|---|
| Dimensions | 32 × 8 × 1 in |
| Color Temperature | 3200K |
| Light Output | 20 Lumens |
| Power Draw | 5 Watts |
| Voltage | 12 volt DC |
| Waterproof | Yes |
Only logged in customers who have purchased this product may leave a review.
(1) Glass Perfect Panel
(2) Powder coated end caps
Click here for most current information: WARRANTY POLICY.
2655 S. Santa Fe Unit 4-A
Denver, CO 80223 USA
DEKOR®️ Canada Fulfillment
205 Champagne Drive, Unit 3A
Toronto, ON, M3J 2C6, Canada
Toll Free: 1-800-258-0344
Copyright 2024| Privacy Policy | Accessibility Statement | WordPress Web Design & Hosting Santa Barbara
Yes, DEKOR® manufactures all circuitry in Denver, CO providing excellent quality.
DEKOR® offers a COLORKONNECT WiFi controller and through the app you can dim the lights, change colors, and set schedules. You may also control light colors with dimming capability manually on the front face of the COLORKONNECT WiFi device.
When using the COLORKONNECT WiFi controller app provides you the ability to control your lights regardless of where you are located.
The 3W4PORT splitter/repeater has two functionalities: the splitter is used to connect the power wire and the three additional ports for 2-3 lights based on your lighting plan. The repeater is to be used every 20’ with long cable runs and at the light connections to enhance the signal creating pure colors from the first light to the last.
DEKOR® offers a simple 3W4PORT Plug-N-Play system with various cable lengths to make the install easy in any application.
Yes, with the use of two or more COLORKONNECT WiFi controllers and wiring two or more zones will deliver different light color patterns.
Yes, you can add to your current non-RGBW DEKOR® lighting system by adding RGBW lights! While the non-RGBW DEKOR lighting system is a 2-wire direct current system, and the RGBW DEKOR lighting system is a 3-wire direct current system, you are able to integrate both systems by creating a separate zone. Either using a splitter running from you current transformer or upgrading to a 100 or 200 watt transformer, which has more than one output from the transformer, you can create an additional zone or zones. Please call us if you need us to walk you through this!
The transconnect cable is for our standard DEKOR® Lighting 2-wire lights. The COLORCONNECT WiFi controller is a 3-wire system. The male-to-male cables come in lengths of 20”, 5’, 10’, 20’ are to be used to connect the COLORCONNECT WiFi controller and then to your first light.
For our RGBW system: The 36-watt and the 60-watt transformers will include one (1) 20’ 3WPNP male-to-male cable. The 100-watt transformer will come with (1) transconnect cable and (1) 20’ 3WPNP male-to-male cable. The 200-watt transformer will include (1) 20’ transconnect cable with two lead wires and (1) 20’ 3WPNP male-to-male cable.
The 3W4PORT splitter/repeater may only be used with the RGBW system. The 6-port splitter is a two wire and can only be used with our standard DEKOR® Lighting system.
David Bower (verified owner) –
Outstanding etched glass panels with lighting!
Marc Roberts (verified owner) –
The etched panels look amazing!